Nobody likes a green slimy mess in their pool. Every pool owner’s greatest nightmare would be algae in their beautiful pool. There might have been a possibility that you ignored a small amount of cloudiness in the corners of the pool or at the sides of the stairs once. Before this “small amount” becomes a “huge” problem, you need to take the right preventive measures to keep your pool algae-free. Look for the best services for the pool near me.
Understand the Reason
Many of you might not know what algae actually are. Algae are basically organisms that are capable of photosynthesis while reproducing on the surface of the water. It is basically a water plant. Algae can grow in your pool due to many different reasons, be it due to particles on somebody’s swimsuit or even a part of slime. Algae can grow really thick making the pool water difficult to see. The most noticeable symptom of the presence of algae is pool water’s discoloration; it can be yellow-ish, green-ish or even black-ish! Any amount or type of growth of algae is harmful to a swimmer. Here are preventive measures for algae:
Vacuuming the Pool
Machine vacuuming might not clean the area where algae are present. It is suggested that you vacuum the pool manually. It will help you in reaching the corners where algae are present and getting rid of it completely.
Balance the Water
The ideal pH level for pool water is between 7.2 and 7.6. You should keep a regular check on the pH level of the pool water to make sure that it does not become an ideal environment for algae to grow. High alkalinity or high acidity can be a problem for you. You can look for the best services for a pool near me and get your pool water balanced.
Shocking
There is always a possibility that a sanitizer might fail at doing its job. Shocking the pool with chlorine often might make it too acidic. You’ll need calcium hypochlorite shock if you already have algae present in the pool water. The amount to be used also depends on the color of the water. Like, for green-ish color, you’ll need to shock it twice, for yellow-ish algae, you’ll need to shock it thrice and for black-ish algae, you’ll have to shock it four times.
Run the Filter
After shocking the water has killed the algae, you’ll need to run the filter of the pool for at least 8 hours. This will help you in getting rid of the cloudiness that might be created after shocking the pool.
Clean the Filter
You will need to clean the whole filter and not just rinse it as you most of the times might do. Cleaning the filter properly might reduce the chances of bringing the algae back into the pool.
Resurface the Pool
If you notice any cracks or crevices in the walls of your pool, get it resurfaced. Any fissures in the walls will increase the chances of bringing algae back in the pool. The corners or such cracks are also very difficult to clean. So, you should anyway get the walls resurfaced if you have an old pool.
It is right that prevention is better than cure. Hence, do not ignore the cloudiness in your pool, if and when you notice it. Make sure you completely keep the pool free of any algae. Even the slightest hint can make these organisms grow at a fast rate. You can reach out or look for any cleaning services for a pool near me to get your pool cleaned.
