A Temecula pool leak can happen anywhere in or outside the pool. Before looking for a pool leak, be sure to inspect your whole filter system area, which includes the chlorinator, filter, pump, heater, etc. If you own an inground swimming pool, leaks can happen when there are cracks in the underground piping. If you suspect this, contact a pool expert at Premier Pools & Spas to check for possible cracks.

Temecula pool leak

To start with, you should ensure that it really is a leak, to begin with. You might be losing pool water from evaporation, or perhaps something else. There are three major causes of pool water loss, they include:

  • Excessive splash or normal evaporation
  • Pool shell leaks
  • Pool plumbing leaks

Here’s how you can confirm a Temecula pool leak:

Dye tests for pool leak detection:

A cheap dye pack is one of the most popular ways of detecting leaks. The dye is attracted to the source of the Temecula pool leak, and can instantly help to detect the source. In such cases, turn your pool skimmer off. After that, place dyes around the areas with the issue such as corners, lights, and fittings. While working your way around your pool, it will be easy to isolate the problematic area. You should not be troubled if the dye does not function the way you expect. Typically, it simply drops to the bottom of the pool, which indicates no major leaks in that part of your pool.

Temecula pool leak

Visually ensure you have a leak:

It will be simple to spot leaks around equipment. This is the reason why a quick visual check will help you fast detect an issue. To start with, inspect the section around your pool and check out saturated ground. If you see water logging around your pool’s landscaping, you might have a leak in your plumbing. In addition, make sure you check the pool’s hardware, which includes the pump, heater, and the filter. These items can stand up to the continuous workload, but they are also susceptible to leaks. Look for sweeping, standing water, water damage, drips, and stains. Leaks occurring in these systems might be repaired with simple chalking or patches or they might need a replacement part.

Overnight testing of the water level:

Do you want to tell the difference between a leak and evaporation? It’s best to do a quick overnight test. To start with, you can use a piece of tape or grease pen to mark the water level of your pool. If you see a leak, the pool water will fall one inch or more an in one to two days; that is not evaporation. Or perhaps you can try out the “bucket test.” Place a small bucket on one of your pool’s step. After that, fill the bucket in order that the water inside will match the pool’s water level. Once more, wait one 1 to 2 days and compare both levels. If you notice more than one-inch of water loss in a day or two probably means a leak.

Temecula pool leak

Temecula Pool Leak – Call Premier Pools & Spas!

If you have depleted your or found a leak, it is most likely time for you to contact an expert pool crew at Premier Pools & Spas of Temecula today. We have special equipment that can identify minor leaks without any damage!

Comment On This Post