Opens in a new tab
In-pool lounge chairs on the tanning ledge of a Premier Pools & Spas pool in Sacramento
Premier Pools & Spas | Sacramento

Sacramento Pool Pricing& Pool Packages

“How much does a pool cost?” is easily one of the questions we’re asked most often. The honest answer is that it depends on the backyard, the design and the features you choose — so our goal is to make pricing easier to understand, from what’s included to what can move the final cost up or down.

Pool Pricing

How Much Does a Pool Cost in Sacramento?

Inground pool pricing can vary a great deal across the Sacramento area for a variety of reasons. There isn’t one price that applies to every swimming pool. The size of the pool, the property it’s being built on, the finishes you select and the features you add can all change the final investment. Believe us, we wish it was as simple as pricing by square or linear footage.

The Classic starts at$53,999
Many of our projects$60,000–$90,000
Pool-spa combos typically begin$80,000–$90,000

At Premier Pools & Spas | Sacramento, our most basic and complete gunite pool package, The Classic, starts at $53,999. After accounting for customizations, slopes, access, plumbing and electrical runs, many of the projects we build fall in the $60,000–$90,000 range, while larger or more customized pools can easily reach six figures. For homeowners planning a pool with an attached spa (a ‘pool-spa combo’), completed projects typically begin in the $80,000–$90,000 range and can also move well into six figures depending on the design and features selected.

Those numbers aren’t intended to tell you what your pool will cost. They’re meant to give you an honest place to start.

Finished Sacramento pool with a tanning ledge, umbrella and lounge chairs
Cost Factors

What Affects the Cost of Building a Pool?

Right out of the gates, one of the biggest costs in building a pool is labor. Most projects move through 15 or more phases of construction, depending on the complexity of your design, with specialized crews handling everything from excavation and steel to plumbing, electrical, gunite, tile, decking, equipment installation and finishing work.

From there, the final price is dictated by both the design and the property itself. Most commonly:

Open any factor to see how it affects your price.

Pool Size and Depth

Somewhere along the way, some people got together and decided 400 square feet (roughly an 80-foot perimeter) became a common starting point for residential pool sizing, with depths often ranging from about 3 feet in the shallow end to 6 feet in the deep end.

Once you go beyond those dimensions, costs can increase quickly. Deeper pools require more excavation, engineering, reinforced steel, gunite and labor. For features such as rock-jumping platforms, we’ll typically design for depths closer to 8 feet, which adds even more structural work.

The same is true for increased surface area and perimeter. A larger pool means more material and more labor at nearly every phase of construction. When additional size and depth are combined, those costs can compound quickly.

Shape and Design Complexity

Freeform. Geometric. Lazy L. Classic. Two-bubble. Three-bubble. Pools in the shape of the State of Texas. Pools that look like guitars. Spools. Lagoon pools with lazy rivers. You name it.

Each has its own complexities, challenges and, yes, pricing. The more elaborate the design becomes, the more excavation, steel, plumbing, gunite, forming and labor may be required to build it.

Interior Finish

The least expensive option will almost always be white plaster. Plaster has been the tried-and-true pool interior for decades. But as technology has changed and materials have advanced, many customers have begun opting for pebble finishes instead.

There are plenty of brand names people associate with pebble finishes (think facial tissues and slow cookers) but the bigger differences are in the material, appearance and durability. White plaster, when properly maintained, will generally need resurfacing sooner, while pebble finishes are designed to last longer and come in a much wider range of colors and textures.

That added durability and customization comes at a higher upfront cost, which is why interior finish can have a meaningful impact on the final price of a pool.

Tile and Coping Selections

Every pool we build will include waterline tile for a number of reasons, but there are different materials for tile – ceramic, glass, etc. – different size formats for those tiles, and so on. Then there can be tile mosaics, trim tile, tile facing on a raised bond beam and raised spas, tile spillways – the list is seemingly endless. The same is true for the coping. Coping is the material that matches the top of the pool to the surrounding decking or landscaping.

All of this is also where pool size and dimensions take effect too. A larger pool will require more of these materials.

Decking Material and Total Square Footage

Most use concrete for the pool decking, and our packages traditionally include at least 500 square feet. It’s quick to install, gives the pool a clean and classic look, and can be colored, stamped and contoured to a custom shape, but it has its own drawbacks – especially during the curing process – and can be susceptible to cracking, mottling and discoloration.

Some customers enjoy the look and durability of a paver deck, which is impervious to cracks and can be fixed and repaired in small sections. Others still prefer travertine which – in addition to a timeless, custom look – is also naturally slip resistant, remarkably heat resistant and can last for decades if properly maintained. On the other hand, it’s prone to scratching and chipping, requires regular sealing and upkeep, and can stain easily if not cleaned.

Each has their place and, yes, cost.

Backyard Access

Home lot sizes are getting smaller every single year, but people’s desire for pools has grown! It’s true that we can build pools in just about every yard (local setbacks and regulations notwithstanding), but it does mean we have to get creative.

We need a minimum of 6’ of clearance for our excavators on our standard digs. However, we do have access to a conveyor system (otherwise known as a “mini dig”) that utilizes two smaller excavators working in tandem to move the dirt from the job site to a moving set of belts and out to the dump truck. As you can imagine, this process is time consuming and can take up to 5 days. It’s the time of the crews and equipment being onsite that really adds up.

Soil and Site Conditions

The fancy way of saying ‘your dirt.’

It can seem unfair that pricing is affected by something you had no control over - like exactly where your home happened to be built - but the ground beneath the pool absolutely matters.

Many areas in our region have what are called expansive soils: clay-heavy soils that swell when they absorb moisture and contract as they dry. That means the ground itself is changing and shifting throughout the year. If you place a large, heavy, rigid structure (like, say, a 20,000 gallon concrete bathtub) in that soil without accounting for those conditions, that movement can create problems. Pools built in expansive soil may require additional engineering, more reinforcement and deeper footings to help protect the structure over time.

In a similar way, many newer developments are built on fill dirt - soil that has been moved from its original location and placed elsewhere to help with grading and leveling. Those sites are carefully engineered, but the conditions beneath a future pool can still create additional structural or engineering requirements.

And then there’s rock.

Parts of the region (looking at you, Rocklin) are built on and around granite shelves, shale and other hard material. When excavation runs into significant rock, crews may need additional time and equipment to chip it out and break it down.

The frustrating part is that we often won’t know exactly what’s underground until the shovels go in.

Attached Spas

You’d think adding a spa would be as simple as putting a small pool inside a bigger pool and heating the water, right? Unfortunately, like most things in pool construction, it’s much easier said than done.

Building the spa itself is only one part of the equation. You also have to account for the heating system (and, at least in California, account for environmental codes like Title 24), additional plumbing, equipment and automation needed to operate the spa independently from the pool, plus trenching for plumbing, gas and electrical runs.

In Sacramento, adding an attached spa can easily add $30,000–$40,000 or more to a completed project, depending on the design, finishes, equipment and site conditions.

Structural Features

This includes everything from raised walls and bond beams, wing walls, grottos, tanning ledges and catch basins to negative or infinity edges, automatic pool covers, rock-jumping ledges, water slides, rock work and so on.

Along with water and fire features, this is where we start getting into some of the truly eye-popping, completely customized, blow-your-socks-off, make-the-neighbors-jealous parts of a pool.

It’s also an area where experience matters. These features aren’t simply slapped onto a finished pool — they have to be engineered and built into the project correctly from the beginning. That takes hard-won skill and know-how, and sometimes it means slowing things down to make sure we’re doing them properly.

You wouldn’t have rushed Michelangelo while he painted the Sistine Chapel, right? (We promise, it won’t take anywhere near that long.)

Water and Fire Features

Sheer descents, chatter falls, waterfalls, deck jets, bubblers, laminar jets, therapy jets, water bowls, fire bowls, fire pits, tiki torches - you name it.

In addition to the cost of the feature itself, most of these require additional plumbing, valves, electrical work and controls back at the equipment pad. Some may also require dedicated pumps, gas lines or other equipment depending on what you’re adding and how you want it to operate.

And for many water features, if you want water to fall, it obviously has to start somewhere above the pool. That usually means creating a raised wall, bond beam, rock structure or other elevated feature first — in which case, see Structural Features above.

One feature might be relatively simple. Start combining several of them, though, and the infrastructure behind the scenes can add up quickly.

Heating and Equipment

Pool equipment has come a long way from the single-speed pumps our grandparents grew up with.

Part of that is efficiency. Part of it is technology. But a big part of it is simply that today’s pools are being asked to do a lot more.

A straightforward pool may only need equipment to circulate and filter the water. Add an attached spa, multiple water features, in-floor systems, long plumbing runs, elevation changes or other elaborate features and suddenly we’re asking that equipment pad to manage several different jobs — sometimes independently and sometimes all at once. That can mean larger or additional pumps, more valves, additional plumbing, upgraded electrical capacity and more sophisticated controls.

Then there’s automation. Homeowners increasingly expect to control their pool the same way they control other parts of their home. Wi-Fi-enabled automation can allow you to operate pumps, lights, heaters, spas and individual water features remotely — and even create different settings depending on how you want to use the pool. The more independently controlled features you add, the more equipment and automation may be required behind the scenes.

Heating has changed too. For decades, the answer was pretty simple: if you wanted to heat your pool, you installed a gas heater. California’s current energy requirements (California Energy Commission, Building Energy Efficiency Standards, Title 24) have made that conversation a little more complicated.

Today, new pool projects generally need a qualifying primary heating source such as a heat pump or solar system. Gas can still be used as supplemental or backup heat, but that means there is a very real possibility that if you want a heated pool, your project may need two heating systems to comply with current state requirements - one primary system and one backup.

That can add considerably more equipment and cost than homeowners may expect when they first say, “I’d like the pool heated.”

And that’s really the theme with equipment overall: the more we ask the pool to do, the more infrastructure we need behind the scenes to make it all work.

Distance to Meters and Other Utilities

Where you put the pool absolutely matters.

It’s not just the cost of PVC, electrical wire or gas line. It’s how far we need to trench from the home’s electrical and gas services to the equipment pad, and then from the equipment pad to the pool itself.

Elevation matters too. If the pool sits significantly above or below the equipment pad, the system has to work against gravity to move water where it needs to go. In simple terms, pushing water uphill takes more effort than moving it across a level yard, and pulling water from a lower or higher elevation can also affect how the system is designed.

Longer plumbing runs, elevation changes and lots of bends and turns can all affect pipe sizing, pump requirements and equipment selection. Sometimes the system simply needs a little more giddy-up to do the job properly.

And most backyards don’t give us a perfectly straight path from Point A to Point B. We have houses, patios, landscaping, utilities and other obstacles to work around.

Placement matters for quality of life too. You probably don’t want the equipment pad sitting next to your tanning ledge, humming away while you’re trying to read a book. We have to balance hydraulics and efficiency with noise, accessibility, safety, building codes and where the equipment actually makes sense for your family and your backyard.

What’s Included

What is Included in Our Pool Pricing

When we describe one of our pool packages as complete, we mean a finished, functional swimming pool. Not simply a pool shell with major costs still to come.

Our package pricing includes the core elements needed to take a standard project from design through completion, including:

  • Pool equipmentVariable-speed pump, filter, pool cleaner and lights
  • Standard engineering
  • All permits and inspections
  • Two days of excavationBetter to be safe than sorry, and it’s credited back if we can do it in one!
  • Included concrete decking
  • All standard construction phases
  • Interior finish
  • Startup and pool orientationPLUS your first 30 days of pool service

Property conditions, upgrades and selections outside the package allowances can affect the final price. Add more if you want it, take away what you don’t. Our goal is simply to establish a realistic starting point rather than advertise a number that doesn’t resemble the finished project.

That’s why we try to simplify things as much as possible with three main ‘packages’ for our customers to choose from. Consider these jumping off points or inspiration for your dream project…

Pool Packages

Explore Our Pool Packages

Not everyone needs the same pool, and not everyone starts with the same budget. Our three packages are designed to give you a clear, turnkey starting point - from a straightforward family pool to a complete pool-and-spa environment with heating and automation already built in.

These aren’t rigid designs. Want to add a feature? Absolutely. Something a little too gaudy that’s included? Let’s scrap it. Think of each package as a starting point - a jumping off point - that can be customized around your backyard, priorities and budget.

At a glanceThe ClassicThe SocialThe Resort
Starting price$53,999$59,999$89,999
Pool size400 sq. ft., 3.5–6 ft.400 sq. ft., 3.5–6 ft.400 sq. ft., 3.5–6 ft.
InteriorWhite plasterPremium pebblePremium pebble
Tanning ledge—✓ with umbrella sleeve✓
Lighting1 pool light2 color-changing LEDs3 color-changing LEDs
Attached spa——7' × 7' with 6 jets + blower
Heating——Gas heater + thermal solar
Wi-Fi automation——✓
Stamped concrete decking500 sq. ft.500 sq. ft.500 sq. ft.

“The Classic”

Built to Swim.

Starting from$53,999

“The Classic” is our most straightforward complete pool package – clean and functional with all the essentials accounted for. It’s perfect for the person looking for a complete, professionally built pool without loading up on upgrades. When someone says “I want a simple rectangle,” this is what we think.

Pool Size & Depth

  • 400 sq. ft. swimming area

    Think roughly 16' × 25' as an easy way to picture the amount of water space included. The pool does not have to be rectangular, though. Freeform, geometric, curved or something in between — the shape can be customized however you’d like, as long as the design stays within the included 400 sq. ft. of surface area.

  • Approximately 80 ft. of perimeter

    Perimeter is simply the total length around the edge of the pool. Think of it like about 30–35 steps to walk around your pool. Shape matters much less than the total square footage and perimeter, so we can get creative with the design without changing the package price, provided we stay within those included dimensions.

  • 3.5 ft. shallow end to 6 ft. deep end

    A practical depth range for everyday swimming, lounging and family use.

Pool Features

  • White plaster interior finish
  • Waterline tile
  • Entry steps
  • Deep-end bench
  • One pool light

Decking

  • 500 sq. ft. of stamped concrete decking included

    That’s about the footprint of a typical two-car garage — enough to create usable space around the pool for walking, lounging and furniture, depending on how you spread it out. Additional decking or upgraded materials can be added. Conversely, if you don’t need all of the included decking, we can talk about reducing it too.

Pool Equipment

  • Energy-efficient variable-speed pump
  • 325 sq. ft. cartridge filter
  • Pressure-side automatic pool cleaner

Excavation, Engineering & Permitting

  • Up to two full days of standard excavation included
  • Engineered pool plans
  • Standard permit costs included
  • Required inspections associated with the permitted project

Startup & Pool Care

  • Professional startup
  • 30 days of chemical balancing
  • Basic cleaning tools, including a leaf skimmer, brush, thermometer and other essentials

Warranty

  • 1-year pool warranty
  • 3-year equipment warranty
  • Lifetime structural warranty
↑ Back to all packages

“The Resort”

Go All In.

Starting from$89,999

The Resort is where pool/spa combos begin at Premier Pools & Spas. And not a boiled-down version. The Resort takes the same complete 400 sq. ft. pool foundation of ‘The Classic’ and ‘The Social’ and turns it into a true pool-and-spa package, with an attached spa, heating options, Wi-Fi automation and other technology already built in.

Pool Size & Shape

  • 400 sq. ft. of swimming area
  • Approximately 80 ft. of perimeter

    Roughly 30–35 walking steps around the edge. The pool can still be freeform, geometric, curved or otherwise customized within those included dimensions.

  • 3.5 ft. shallow end to 6 ft. deep end

Attached Spa

  • 7' × 7' attached spa

    49 sq. ft. of pure spa bliss in addition to the 400 sq. ft. pool. A little larger than the footprint of a king-size bed, your spa starts with up to six therapy jets, plus the spa blower for enhanced jet performance.

Pool Features

  • Premium pebble interior
  • Tanning ledge
  • Waterline tile
  • Entry steps
  • Deep-end bench

Lighting

  • Three color-changing LED lights

    Two in the pool, one in the spa.

Title 24 Compliant Heating Package

  • 400,000 BTU natural-gas heater PLUS a thermal solar heating system

    This gives you a compliant primary heating system with the flexibility of gas backup when needed.

Automation

  • Wi-Fi-enabled automation system

    Kick your spa on while driving home from work right from your phone. Manage heating, lighting and other supported pool functions remotely. Total control over your aquatic evening, right at your fingertips.

Pool Equipment

  • Energy-efficient variable-speed pump
  • 325 sq. ft. cartridge filter
  • Pressure-side automatic pool cleaner
  • In-line chlorinator

Decking

  • 500 sq. ft. of stamped concrete decking included

    Roughly the footprint of a typical two-car garage. Additional decking or upgraded materials can be added.

Excavation, Engineering & Permitting

  • Up to two full days of standard excavation included
  • Engineered pool plans
  • Standard permit costs included
  • Required inspections associated with the permitted project

Startup & Pool Care

  • Professional startup
  • 30 days of chemical balancing
  • Basic cleaning tools

Warranty

  • 1-year pool warranty
  • 3-year equipment warranty
  • Lifetime structural warranty
↑ Back to all packages

The Classic, The Social and The Resort are starting points, not limitations.

You can change the shape. Add a spa to The Classic. Upgrade the finish. Add more decking. Incorporate water features, lighting or automation. Or even remove something you don’t need.

The package simply gives us a defined amount of pool and a clear list of inclusions so you know where the conversation and (most importantly) the pricing begins.

Buying a pool is stressful and at times confusing enough. And that’s really the point here: clarity, flexibility and one less thing to worry about.